Saturday, October 1, 2011

Mustang Madness 2: The gathering storm!

Here's an image showing the port sidewall of the new Tamiya P-51D, tricked out with our new Mustang cockpit stencils. Click on the above image to see it in more detail.

I know I promised to post a new blog entry a few days ago, but a family situation took me away from my blogging duties. Its been an extremely weird year for me; its certainly had its ups and downs. I'm back and here to make good on my promise.

Again, most of you may already be aware of this, but BarracudaCals has released a new decal sheet for the Tamiya Mustang;
BC32010 P-51D Mustang Cockpit Stencils and Placards in 1/32 Scale.


This sheet is comprised of over 100 separate decals that replicate nearly every stencil or placard in the cockpit of the P-51D. Yes, this will take a bit of time and care to install, but the results, as you can see in the image above, will be well worth it.

As with the P-51D Part 1 decals announced in the previous entry, these stencils are well researched, fit to the actual kit parts, and beautifully printed by Cartograf. Clear carrier film is kept to a bare minimum, and they really suck down over detail very well, as they are commendably thin.

Once you see a 1/32 Mustang cockpit with these little babies installed, you will find it hard to build yours without! All part of my little plan. World domination? Noooo! Don't be silly! Not at first... Now, I've been asked more than once if these cockpit stencils will be made available in 1/48th scale. To which, I reply "Hey! No fair peeking!"


Once you see a 1/32 Mustang cockpit with these little babies installed, you will find it hard to build yours without! All part of my little plan. World domination? Noooo! Don't be silly! Not at first... Now, I've been asked more than once if these cockpit stencils will be made available in 1/48th scale. To which, I reply "Hey! No fair peeking!"

Now, I promised you an announcement about the forthcoming resin sets for the Mustang in 32nd scale. Here is a breakdown of the sets to be released. They are still in the works, but they should be released in about two weeks. Once they are finished , I will post images of the parts and the sets will become available for preorder.

BR32012 P-51D Mustang Cockpit Sidewalls
Super detailed, accurate cockpit sidewalls directly replace the Tamiya
kit parts. Much extra detail such as wiring, refined switches, and separate parts add to the realism. Resin castings supplimented with photoetched parts, including perforated canopy rails and uplocks for the gearbays.

BR32013 P-51D Mustang Instrument Panel
A super detailed resin instrument panel, with high quality etched parts and super crisp and petite film dials, directly replaces the Tamiya kit panel. This will yield a much more authentic look. May be adapted to fit other 1/32 Mustang kits.

BR32014 P-51D Mustang Cockpit Upgrade
Super detailed resin cast radio, battery, stick, gunsight and throttle quadrant for the Tamiya P-51D. All parts are highly visible in the finished model, and will add that extra touch of realism to your masterpiece. May be adapted to fit other 1/32 Mustang kits.

BR32015 P-51D Mustang Mainwheel Tires
Resin cast tires directly replace the soft rubber Tamiya kit tires. The advantage being that the mold parting seam on the kit tires is very difficult to remove and the tires are dust and dirt magnets. While they can be painted, the paint adhesion is not good. Resin tires have none of these drawbacks. Clean, seamless castings need little work to be ready to install.

BR32016 P-51D Mustang Paper Droptanks
Resin cast nose and tailcones for the 108 gallon paper tanks replace the kit parts, which are smooth and scribed. The real tanks were made of paper mache, and the nose and tailcones were scalloped and slightly irregular. Just saw off the front and rear of the kit tanks and attach these new resin parts. The saves on weight, as well as allowing plastic cement to be used to hang the tanks.

Now, please read this part carefully! These sets ARE NOT available yet. They are coming soon. I have not added them to the website, and will not be accepting pre-orders yet. I just want to be sure that everyone understands this to avoid disappointment. I will post pictures later this week. I will also be sure to get the press release about the release dates to all the major sites as soon as I am convinced they will be ready to ship on time. They will also be announced here and on the Barracuda Studios website as well.

The second half of 2011 is certainly a great time to be a Mustang mad modeller!

Off to bed now, its super late again.

Roy


2 comments:

  1. Hi Roy

    It's great to see the addition of the Barracuda parts for the Tamiya Mustang! Did you use them in the build you did for the book "How to Build Tamiya's 1/32 P-51D Mustang"?

    Keep up the great work.

    cheers

    Andy
    Toronto

    ReplyDelete
  2. Hello There!

    Really glad to see that you've produced such comprehensive group of upgrade sets for the Tamiya Mustang. They look superb! I have your upgrade sets for Tamiya's Spitfire (though I still haven't made the time to use them) and they don't disappoint! Cleanly cast and with well rendered detail. I will definitely be ordering a large chunk of the newly released sets for the Mustang!

    All I can say is keep it coming!

    _pL

    ReplyDelete